Mvci Driver For Toyota Windows 10 64 Bit

Posted on 05-10-2021 by admin

Latest version V14.10.020 Toyota TIS Techstream has been tested and verified working on issue by obdii365.com engineer.

Software version: V14.10.028

Open the Device Manager the device should be loaded. If not, right click each failing device, select Install Driver, then ”Browse my Computer” and locate to “C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS” (enable the ”include subfolders” flag). Click ”Next” and wait until drivers are installed.

2.Open “TechstreamSetupNAV14.10.028” to setup, just click on “Next” until finish. 3.Click on “MVCI Driver for ToyotaCable 2.0.1” to setup Mini VCI driver for Toyota TIS. 4.Open “Techstream” on the desktop. 5.Toyota Techstream 14.10.028 requires to register. Click on “Cancel” (no need key but easily. I post links for download: Toyota Techstream 10.10.018, drivers MVCIDriverfor.msi Then I will tell you how to install the driver and the program under Windows 7 or 8.1 x64. The instruction can be found on the Internet, but I will write it here. INSTALLATION INSTRUCTIONS Techstream on Windows 7, 8.1 – x64 bit.

(Crack version. No Activation)
Operation system: Windows 7 32 bit

Toyota Teschstream 14.10.028 has been tested OK with:

Mini VCI cables (SV46-D, SV46-D1), Mangoose VCI and Vxdiag Vcx Nano for Toyota

Free Download Toyota Techstream V14.10.028 Software

How to install Toyota Techstream 14.10.028 software?

Step 1: Install Setup
Open software CD

Open Techstream_V14.10.028 folder

Copy and paste Techstream_SetupNA_V14.10.028 to desktop
Run Techstream setup on desktop

Select setup language

Install Techstream InstallSheild Wizard
Press Next
Accept license agreement

Enter customer information, User Name: AADD, Company name: toyota, press Next

Install the program

Finish

Step 2: Install driver

Run MVCI Driver for Toyota-Cable 2.0.1

Install Mini VCI driver for Toyota TIS, press Next

Ready to install

Finish driver installation

Step 3: Crack Techstream
Open Techstream software on the desktop

If windows gives a Java Runtime error, press No to ignore.
Launch Techstream 14.10.028 software

If techstream requires a registration key, press Cancel

Select Setup tab->VIM Select, select interface: Xhorse-MVCI

Open readme.txt on software CD

Copy Techstream.exe”/395070/VM:1

Right click Techstream Properties on desktop

Replace MainMenu.exe by Techstream.exe”/395070/VM:1 in Target area

Then Apply

Step 4: Install Device Driver

Connect Mini VCI J2534 cable with laptop

Installing device driver software

Open MVCI Firmware Update Tool
Read Device Info
Device connected

Step 5: Run Techstream

Open Techstream software on the desktop
Initializing USB communication

Read vehicle information and confirm

Start diagnose vehicle

Techstream definitely works with the Microsoft Windows 10 (x64) operating system. Here are easy directions for newbies to install/setup Techstream on Windows 10 64 bit for VXDIAG VCX NANO Toyota.

Questions and answers… here you go.

Q: I am trying to download a version of Techstream to my Windows 10, 64 bit computer, so I may use my new VCX Nano to diagnose my car issue- won’t start after 6 weeks sitting dormant.

A: Techstream has been compatible with 64 bit OSes for a while, so I don’t think that is your problem.

However, the driver for VxDaig Nano (which is what I think you meant) is not a 64 bit driver, so you will need to go back the sellers of VxDaig and seek their support to load it on a 64-bit system.

The other option, find a cheap laptop on eBay or CL with Win 7 and follow the VxDaig Nano instructions and it will load right up.

Q: What version of Techstream is compatible with the 2nd gen? Will v12 work?

A: I had 12.xx.024 for a bit but it was minus several menus needed for better diagnostics:(.

The guy I share the Prolong setup with used the version 12 software on his 2007, so it’ll work on a Gen2 ;).

Reloaded 10.30.029 and it works well(y).

Q: Can you post the instructions or a good link for installation on win 10?

A: This link describes the installation process, possibly with link to the software.
http://blog.obdexpress.co.uk/2017/01/24/install-mini-vci-with-techstream-v10-on-64bit-computer/

I think the first requirement is that your mini VCI cable hardware is capable of 32 and 64 bit, I think some of the earlier cables may be 32-bit (XP) only. If capable of 64-bit, then they give you a small CD with some special files “XHorse” and it takes a little bravery to mess with your Registry etc.

Btw, Many people will not be able to follow the instructions to install the necessary cominents. No judgement here, it is just reality.

Which is why I up telling people to stick with using an XP laptop instead.

Xhorse Mvci Driver For Toyota

That would be great if you have an XP laptop (or desktop) available…it is definitely a much easier install. But going forward I presume that’ll be harder to find. I thought the Win10 instructions were a little confusing but I worked thru it.

Q: How to install Techstream v10 on Windows 64 bit?

A: Quick note on techstream 10.x with windows 7 or greater x64 with the 1.4.1 (and possibly the 2.0.1) Mini VCI cable. I was having absolute fits trying to get the driver recognized. Turns out the cable was being recognized as a Broadcom Bluetooth 3.0 Chip. If you select that device, Select Update driver, Select Let me Pick From a list of device drivers on my computer (letting windows scan a specific location doesnt work), then click have disk and browse to the location of your MCVI drivers (Should be C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS) and go to the ftdibus directory and select the ftdibus.inf file. This will get the correct drivers in place for the bus. The COM drivers will install automatically after you get the bus driver in place.

Hopefully the search engines pick this up and it is helpful for someone else.

Q: Tips needed for Windows 10.

A: anyone wanting to try this, use a laptop of computer (or virtual machine) that you have zero personal information on and you do not banking or commerce with.

#1 top attack vector (phishing, malware, spyware…etc) is from these kinds of unauthorized downloads.

Techstream is a paid-for item from Toyota. any pirated copies, wow rolling the dice there….

go ahead and use it but on a laptop that is disposable and you do zero personal or private work with

source: this is what I do for a living (everything and anything in the CISSP)

Q: Does anyone have answers and easy directions for computer dummies?

Xhorse Mvci Driver Download

A: TIS Techstream V10 Setup Instruction ( !!! for 64 bit system !!! ) :

copy “Program Files (x86) “folder to drive C: , tick “replace all current items “

plug the Mini VCI cable into USB

Open the Device Manager and locate two failing devices in the list. Both will appear with yellow icon (usually under “Other”), indicating that Windows failed to install drivers for them. Now, right click each failing device, select Install Driver, then “Browse my Computer”and locate to “C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS”(enable the “include subfolders”flag). Click “Next”and wait until drivers are installed.

You should now see two new devices: “Universal Serial Bus ControllersUSB Serial Converte”and “Ports (COM & LPT)USB Serial Port (COMx)”.

Run the FirmwareUpdateTool.exe from the “C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS”. Click “Device Info”, You should see the “Device connected”screen.

Now install Techstream software using “Techstream_Setup_V10.10.018.exe” on our software CD

Software Registration: copy the two *.ini files in “Registration”folder to “C:Program Files (x86)Toyota DiagnosticsTechstreamEnv

* Attention: It’s C:Program Files (x86) not C:Program Files , BIG DIFFERENCE !!!

Registry Hack: Run the mvci-64bit.reg file to modify the registry for Techstream to recognize MINI-VCI under Windows x64

Run Techstream software. Go to Setup | VIM Select menu and select the “XHorse – MVCI”

Connect Mini VCI cable to your car’s OBDII interface, turn ignition on, then click “Connect to Vehicle”in Techstream. Wait. Then wait again. If everything works, you will be prompted to confirm car year/model after which you’ll get to the diagnostic interface.

* Important Note:

DO NOT change the “User Type”when you will run your TIS Techstream for 1st time! LEAVE IT with the Default option! “Official”Dealer/Repairer with other words…
in [ VIM Select ] option, please select the [ Xhorse – MVCI ], not [ TIS Techstream VIM ]
If you get the following reminder while using the program:

—————————————————————-